Mountain biking in cold weather has always been a
challenge. The problem is that you'll start out
cold then warm up and break a sweat, making yourself
wet. Then, when you travel downhill, the combination
of wet skin and windchill will be quite chilling.
Below, you'll find a list of the cold weather clothing
that will make winter riding less of a bone chilling
experience.
Booties
In cold temperatures, your feet are the most vulnerable
part of your anatomy. Pressure from pedaling will
tend to cut off the circulation to your toes, which
can put you at a risk of frostbite. In cold conditions,
neoprene booties are a must have. They will zip over
your shoes and even have a pattern in the sole where
you can cut out a piece for cleats.
Gloves
There are several manufacturers that make "lobster
gloves", a hybrid glove that separates your index
finger and thumb from the rest of your hand. These
gloves are warmer than regular gloves, and the distinct
index finger will allow you to operate your shifting
and brake levers.
In case your hands get cold, you should carry a pair
of lightweight glove liners will you as well. If you
have to stop to take care of a problem, the liners will
protect your hands from the cold.
Glasses
Glasses that wraparound and provide maximum protection
from the wind are best to wear in the winter. You can
protect yourself from debris, as well as the cold.
Socks
You should wear heavy socks although not to heavy. A
sock that is overly heavy will make your shoes tight,
cut off circulation, even make your feet cold. You
should try lightweight socks, as they will keep your
feet warm without bulk. If you need an extra layer,
try silk ski socks as they are very warm and also
extra lightweight.
Underwear
Polypropylene is the best material here, as it is
lightweight and best for colder temperatures.
Wind protection
Moving air is the biggest cause for losing body
heat. By having good wind protection you'll be able
to vent perspiration while also protecting yourself
from windchill. You should choose pants and a jacket
based on durability, breathing, and price as these
types of clothing can get very experience.
Helmet and liners
Your head is very important, as you lose 50% of your
body heat through your head. A helmet is designed to
keep you cool in the summer, not warm in the winter. A
fleece liner inside your helmet will keep your head
and ears warm during winter riding.
The History Of Mountain Biking
There is a lot of history and information out there
in regards to the history and origins of mountain
biking, with some being recognized and some that
depends on who has the best firm of public relations.
Some say that mountain biking began with the Buffalo
Soldiers, which was a turn of the century infantry
who customized bikes to carry gear over the rough and
tough terrain. They began in August of 1896, over
the course of 800 miles. Their mission was simple -
to test bikes for military use in the toughest of
terrain.
Others say it was the Velo Cross Club of France
that started mountain biking. The club was comprised
of 20 young bikers from Paris, who between 1951 and
1956 developed a sport that resembles present day
mountain biking.
It could have also been John Finley Scott, who was
the first mountain biker in the U.S. In 1953 he
constructed what he called a "Woodsie Bike", using
a diamond frame, balloon tires, flat handle bars,
and cantilever brakes. He was more than 20 years
ahead of his time. Even though he remained an off
road enthusiast, there were many at that time who
didn't share that same passion.
Today, we believe that the history of the mountain
bike is most apparent in Northern California. There
are a few areas that claim to be the first community
for mountain biking, although each and every history
book will tell you Marin County.
The sport of mountain biking has taken many twists
and turns over the last several hundred years. Even
though there are many that say different things about
the history and the beginning, we know one thing
for sure - one thing has led to another and the
sport of mountain biking was born.
in regards to the history and origins of mountain
biking, with some being recognized and some that
depends on who has the best firm of public relations.
Some say that mountain biking began with the Buffalo
Soldiers, which was a turn of the century infantry
who customized bikes to carry gear over the rough and
tough terrain. They began in August of 1896, over
the course of 800 miles. Their mission was simple -
to test bikes for military use in the toughest of
terrain.
Others say it was the Velo Cross Club of France
that started mountain biking. The club was comprised
of 20 young bikers from Paris, who between 1951 and
1956 developed a sport that resembles present day
mountain biking.
It could have also been John Finley Scott, who was
the first mountain biker in the U.S. In 1953 he
constructed what he called a "Woodsie Bike", using
a diamond frame, balloon tires, flat handle bars,
and cantilever brakes. He was more than 20 years
ahead of his time. Even though he remained an off
road enthusiast, there were many at that time who
didn't share that same passion.
Today, we believe that the history of the mountain
bike is most apparent in Northern California. There
are a few areas that claim to be the first community
for mountain biking, although each and every history
book will tell you Marin County.
The sport of mountain biking has taken many twists
and turns over the last several hundred years. Even
though there are many that say different things about
the history and the beginning, we know one thing
for sure - one thing has led to another and the
sport of mountain biking was born.
The Bunny Hop
In mountain biking and even BMX riding, the bunny hop
is a bike trick that involved the rider lifting the
bike up and over an obstacle while remaining in
motion on the bike. Experienced bikers can lift
their bikes in excess of a meter or one and a half
feet. The world record for the bunny hop stands at
4 feet.
The bunny hop is executed by approaching an obstacle
with speed, lifting the front of the bike then
leveling the pedals. If the bike has full or front
suspension, pre-load the shocks by pressing down
on the bike just before you reach the obstacle.
Once the shocks have been pre-loaded, the rider
will spring upwards, pulling up with the hands and
feet at the same time. Toe straps or clipless
pedals help with this, although if plain platform
pedals are used, it's still possible. As the biker
lifts, the hands will roll through twisting the
throttle. After the object is cleared, push down
on the bike then absorb the impact with the arms
and the legs.
It's often times a misconception that a bunny hop
without toe clips is achieved by rotating forward
on the handlebars. Lifting up on a mountain bike
while standing next to it is quite difficult to
hold on to the handle bars.
The bunny hop is very popular with mountain biking,
as experienced riders can make it look a lot easier
than it actually is. New mountain bikers should
practice a lot before they actually attempt the
hop, as doing it on a bigger obstacle can easily
be quite dangerous.
With proper practice, the bunny hop can be achieved,
even for beginners. All you have to do is give it
some time and effort, and you'll be pulling off the
bunny hop just like the pro's do it.
is a bike trick that involved the rider lifting the
bike up and over an obstacle while remaining in
motion on the bike. Experienced bikers can lift
their bikes in excess of a meter or one and a half
feet. The world record for the bunny hop stands at
4 feet.
The bunny hop is executed by approaching an obstacle
with speed, lifting the front of the bike then
leveling the pedals. If the bike has full or front
suspension, pre-load the shocks by pressing down
on the bike just before you reach the obstacle.
Once the shocks have been pre-loaded, the rider
will spring upwards, pulling up with the hands and
feet at the same time. Toe straps or clipless
pedals help with this, although if plain platform
pedals are used, it's still possible. As the biker
lifts, the hands will roll through twisting the
throttle. After the object is cleared, push down
on the bike then absorb the impact with the arms
and the legs.
It's often times a misconception that a bunny hop
without toe clips is achieved by rotating forward
on the handlebars. Lifting up on a mountain bike
while standing next to it is quite difficult to
hold on to the handle bars.
The bunny hop is very popular with mountain biking,
as experienced riders can make it look a lot easier
than it actually is. New mountain bikers should
practice a lot before they actually attempt the
hop, as doing it on a bigger obstacle can easily
be quite dangerous.
With proper practice, the bunny hop can be achieved,
even for beginners. All you have to do is give it
some time and effort, and you'll be pulling off the
bunny hop just like the pro's do it.
Types Of Mountain Biking
can be split into 9 different categories.
These categories are very versed in
what they offer. They are:
1. BMX
BMX is a style where the bikes offer 20 inch wheels.
These bikes are commonly used at skate parks or
with dirt jumps. Because of their smaller wheels
and shorter wheel bases, BMX bikes are much easier
to perform tricks and stunts with.
2. Cross country
This type of mountain biking involves riding your
bike up and down hills. Although it's the least
extreme form of mountain biking, most cross country
riders are very fit and go on long rides.
3. Cyclo cross
This is a cross between road and mountain biking.
These riders have to go over obstacles, cross through
rivers, and race on and off the course.
4. Dirt jumping
Dirt jumping involves jumping the bike over large
man made dirt jumps then doing tricks while they
are in the air. These jumps are normally close
together so riders can go over six or more jumps
in one run, gaining a flow to give them more
speed for bigger jumps.
5. Downhill
Downhill mountain biking involves racing downhill
as fast as possible. This type of riding is very
intense and extreme, offering riders the chance
for ultimate thrills and excitement.
6. Freeride
Free riding involves finding the perfect line down
the mountain using all of the terrain to express
yourself. These competitions are very popular,
as riders can express themselves any way they see
fit.
7. Single speed
Not to be confused with fixed gears, this is a form
of cross country biking that's done using a bike
with only one gear and fewer components. The idea
with single speed is simplicity. The straight
chain line will provide efficient pedaling, and
the lack of components mean less mechanical
problems and a lighter bike.
8. Street and urban
This type of riding involves riding in urban areas,
ledges, and other types of man made obstacles.
Riders of street and urban biking will do tricks
as well, such as stalls and grinds.
9. Trails
Trials are considered an aspect of mountain biking,
although the bikes used look nothing like mountain
bikes. They use 20 or 26 inch wheels and sport
small, low frames. Trail riders will hop and
jump their bikes over obstacles, which requires
an extreme amount of balance and concentration.
About The Author:
Deon Melchior is the Editor and Publisher of Article Click. For more FREE articles for your ezine and websites visit ArticleClick.com. Article Click is a free content article directory. You may reprint this article, as long as the article is unedited and this author box is included with it's live hyperlinks.
Technical Down Hill Mountain Biking
The key to down hilling is relaxing your upper body.
The steeper and rockier the hill is, the more tightly
the rider tends to put a death grip on the handle
bars. Most riders tend to slow down as they approach
obstacles such as rocks, then apply both brakes.
If you don't apply your brakes, the rock will stop
your wheel. This isn't good, as the rock can throw
you off balance and completely kill any type of
momentum you have.
Relaxed riders won't slow down as much. The
combination of extra momentum, no front braking at
crucial moments will allow the wheel to bump over
the rock and continue onward with little effort.
If you are going slow, it's essential to release
your brakes as much as possible when you approach
an obstacle. This may entail going a bit faster,
although the result is much less painful. On
steep hills, going really slow will always make
things much more difficult.
One exception to this is a very tight turn. If a
hop is out of the question, you'll need to slow
down to allow the smallest radius of turning circle.
This kind of thing takes practice, although track
standing isa great way to improve on your balance.
Although down hilling is one of the most extreme
methods of mountain biking, it can also be one of
the most dangerous. If you're new to mountain biking
you shouldn't start out with down hilling, as it
takes a lot of practice.
With a bit of practice and knowing the right
techniques, technical down hilling is something you'll
find fun. It can provide quite a rush and a lot
of excitement for those who seek adventure.
The steeper and rockier the hill is, the more tightly
the rider tends to put a death grip on the handle
bars. Most riders tend to slow down as they approach
obstacles such as rocks, then apply both brakes.
If you don't apply your brakes, the rock will stop
your wheel. This isn't good, as the rock can throw
you off balance and completely kill any type of
momentum you have.
Relaxed riders won't slow down as much. The
combination of extra momentum, no front braking at
crucial moments will allow the wheel to bump over
the rock and continue onward with little effort.
If you are going slow, it's essential to release
your brakes as much as possible when you approach
an obstacle. This may entail going a bit faster,
although the result is much less painful. On
steep hills, going really slow will always make
things much more difficult.
One exception to this is a very tight turn. If a
hop is out of the question, you'll need to slow
down to allow the smallest radius of turning circle.
This kind of thing takes practice, although track
standing isa great way to improve on your balance.
Although down hilling is one of the most extreme
methods of mountain biking, it can also be one of
the most dangerous. If you're new to mountain biking
you shouldn't start out with down hilling, as it
takes a lot of practice.
With a bit of practice and knowing the right
techniques, technical down hilling is something you'll
find fun. It can provide quite a rush and a lot
of excitement for those who seek adventure.
Spring Tune Up Tips
If you don't ride in the winter, you've probably
spent the winter months on the couch eating chips
and watching television. Before you know it, spring
will be here and a new season of mountain biking
will begin. Even though your body may not be in
shape, these tips will ensure that your bike is.
Before you take your bike out, check the wear and
tear on your components and adjust them if its
necessary. Start off with your chain. If you
haven't replaced it in a year or more, it's time
to do so. Over time, the individual parts in the
chain will get worn out, increasing its effective
length.
As this happens, the chain is no longer able to
conform to the cog and the teeth of the chain ring,
so it wears those teeth out to fit the profile of
the chain. If you can replace the chain before it
stretches too much you'll save yourself from having
to replace high priced cogs and chain rings.
Now, check the bearing surfaces. These include your
bottom bracket, hubs, and the headset. Each of these
should turn without a problem with no play in the
system. Before checking the bottom bracket, make
sure each cranking arm is snugged tight. Next, hold
on to the crank arm (not the pedal) and wobble it
back and forth. If you hear any clicking or if the
crank arm binds, the bottom bracket needs to be
adjusted.
Do the exact same thing with your hubs. Take the
wheels off the bike, spin the hub axles, then feel
for any free play or binding. If you feel play or
binding, you need to make an adjustment. To check
the headset, start off by putting the newly adjusted
wheels back on the bike.
Now, grab the front brake and pull and push the
handle bars back and forth. There shouldn't be any
play. If you lift the front end off the ground,
the fork should turn very smoothly. If it feels rough,
it needs to be either adjusted or replaced.
While your looking, check the condition of your cables
and housing. The cables should be rust free and the
housing shouldn't be cracked or kinked. If you see any
of this you should replace the offending device, as if
you don't your shifting and braking will be sluggish.
Last, you should inspect your brake pads. Most pads
will have ridges or indicator marks that will let you
know when they need to be replaced. Brake pads that
are worn out will comprimise both safety and braking
efficiency.
Once you've got the tune ups out of the way, it's time
to go for a ride. With your mountain bike running
better than ever, all you have to do now is have fun!
spent the winter months on the couch eating chips
and watching television. Before you know it, spring
will be here and a new season of mountain biking
will begin. Even though your body may not be in
shape, these tips will ensure that your bike is.
Before you take your bike out, check the wear and
tear on your components and adjust them if its
necessary. Start off with your chain. If you
haven't replaced it in a year or more, it's time
to do so. Over time, the individual parts in the
chain will get worn out, increasing its effective
length.
As this happens, the chain is no longer able to
conform to the cog and the teeth of the chain ring,
so it wears those teeth out to fit the profile of
the chain. If you can replace the chain before it
stretches too much you'll save yourself from having
to replace high priced cogs and chain rings.
Now, check the bearing surfaces. These include your
bottom bracket, hubs, and the headset. Each of these
should turn without a problem with no play in the
system. Before checking the bottom bracket, make
sure each cranking arm is snugged tight. Next, hold
on to the crank arm (not the pedal) and wobble it
back and forth. If you hear any clicking or if the
crank arm binds, the bottom bracket needs to be
adjusted.
Do the exact same thing with your hubs. Take the
wheels off the bike, spin the hub axles, then feel
for any free play or binding. If you feel play or
binding, you need to make an adjustment. To check
the headset, start off by putting the newly adjusted
wheels back on the bike.
Now, grab the front brake and pull and push the
handle bars back and forth. There shouldn't be any
play. If you lift the front end off the ground,
the fork should turn very smoothly. If it feels rough,
it needs to be either adjusted or replaced.
While your looking, check the condition of your cables
and housing. The cables should be rust free and the
housing shouldn't be cracked or kinked. If you see any
of this you should replace the offending device, as if
you don't your shifting and braking will be sluggish.
Last, you should inspect your brake pads. Most pads
will have ridges or indicator marks that will let you
know when they need to be replaced. Brake pads that
are worn out will comprimise both safety and braking
efficiency.
Once you've got the tune ups out of the way, it's time
to go for a ride. With your mountain bike running
better than ever, all you have to do now is have fun!
Subscribe to:
Comments (Atom)